Tillotson carburretor HW10A Avenger, for KF3 engines
Venturi Diameter 20mm
Throttle Bore Diameter 26mm
Butterfly Opening
Avenger Class Venturi/Body Design
Avenger Class Inlet Needle and Seat Design
Avenger Class Idle/Acceleration Nozzle Design
Applications:
KF3, CIK Championships
Can also be used to upgrade an HL carburettor with similar size venturi and throttle bores, such as the HL-334A (but check your local rules to make sure the carburettor model number is not mandated).
Can also be used with 4-stroke engines if modified for pulse hole.
Carburettor Settings:
KF Engines vary by manufacturer, manufacture date and tuning. For optimum performance, you might need to try different settings. Below is a listed of recommended settings, starting with most recent/most popular first. For best results, start with the most recent and then adjust first the High then the Low needle each in 1 minute increments up to 3-5 minutes each (extreme conditions like hot or rainy weather may require a little more). If you are not satisfied, repeat the procedure with the next setting.
L=1 Turn 30 minutes; H=32 minutes
L-1 Turn 30 minutes; H=30 minutes
État | |
Fabricant | Tillotson |
Numéro tarifaire douanier |
Moyens de paiement